7417: Hex Driver, Noninverting (Open Collector to 15 Volts)

All six noninverting drivers may be used independently. On any one driver, the low-input condition drives the output low. The high-input condition drives the output to an open circuit. In the low state, the circuit can sink 40 milliamperes. In the output-high or open-circuit state, the output can withstand 15 volts. An output-high state can be obtained only by adding an external resistor to some positive voltage less than 15 volts. Note the supply voltage remains at +5 volts.

Pinout
Pin # Pin Assignment
1 Input 1
2 Output 1
3 Input 2
4 Output 2
5 Input 3
6 Output 3
7 Ground
8 Output 4
9 Input 4
10 Output 5
11 Input 5
12 Output 6
13 Input 6
14 Power (+5V)

Contents