7416: Hex Driver, Inverting (Open Collector to 15 Volts)

All six inverting drivers may be used independently. On any one inverter, the low-input condition drives the output to an open circuit. The high-input condition drives the output low. In the low state, the circuit can sink 40 milliamperes. In the open-circuit or high-output condition, it can withstand up to 15 volts on the output. An output-high state can be obtained only by adding an external resistor to some positive voltage less than 15 volts. Note that the supply voltage must remain at +5 volts.

Pinout
Pin # Pin Assignment
1 Input 1
2 Output 1
3 Input 2
4 Output 2
5 Input 3
6 Output 3
7 Ground
8 Output 4
9 Input 4
10 Output 5
11 Input 5
12 Output 6
13 Input 6
14 Power (+5V)

Contents